under quenching meaning in Chinese
淬火不足
Examples
- Aim : to analyze the mechanism , thermadynamic theoretical basis , dynamic mechanism and influencing factors of thermally induced phase separation ( tips ) in order to completely grasp the factors affecting the size , distribution and form of pores , so that the adjusted range of pore can be widened and the preparation of porous membrane can be repeated and controlled . methods : considering from the structural characteristics of tissue engineered materials , the methods of preparing porous membrane using tips technique , the hermadynamic theoretical basis , dynamic mechanism and influencing factors were analyzed , the problems and investigative directions in the future were also analyzed . tips technique is a process of phase separation of polymer homogenous solution under quenching , and it is suitable for diameter and structural form of the micropore materials prepared using tips are closely correlated with the kind and dispensing proportion of polymer attrnuant , polymer concentration and polymer molecular mass , etc . conducted , including determination of polymer - solvent system phase diagram , study of form and appearance of porous membrane of different thickness , study of form and appearance of porous membrane prepared with systems of different x , which is the parameter of polymer - solvent interaction
目的:分析热致相分离成膜过程的机理、热力学理论基础、动力学机制以及影响因素,以便充分掌握影响孔度大小、分布、形态的因素,使孔度调控范围得以拓宽,使多孔膜的制备能重复可控.方法:从组织工程材料结构特点出发,分析热致相分离聚合物多孔膜的制备方法及该法成膜的热力学理论基础、动力学机制以及影响因素.并分析实验中存在的问题及今后的研究方向.结果:以热致相分离法可制备聚合物多孔膜.热致相分离法制备多孔膜是高聚物均相溶液在淬冷条件下发生相分离的过程,它适用于上临界共溶温度型聚合物一稀释剂二元体系.热致相分离法成膜的过程,可以认为是旋节线机理占主导地位.热致相分离法制备的微孔材料,其孔隙率、孔径大小、结构形态与聚合物稀释剂的种类、组成配比、聚合物浓度、聚合物分子量等因素密切相关.结论:可采用热致相分离技术制备多孔膜,通过改变不同的成膜条件可获得一系列不同孔径尺寸和孔径分布的多孔膜材料.对热致相分离成膜过程中聚合物-溶剂体系的相图测定,不同厚度的多孔膜形貌研究,不同x (聚合物-溶剂相互作用参数)体系所制备的多孔膜形貌等需深人研究